| Certification: | RoHS, CE |
|---|---|
| Material: | Ceramic |
| Type.: | Resistance Heater |
| Cable: | High Tempature Cable |
| Place of Origin: | Fujian,China |
| Heating Zone: | 43mm |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier ----ceramic hot surface igniters for the sake of environment.
Characteristic
1.High temperature-resistance ceramic heating element which can reach a permanent working temperature
above 750°C
2.Energy saving, super fast heating-up
3.Air can through and around inside and outside of the heater.
Heat can be transfered from both inside and ouside of the heating element.
4.Electrically oxidation and corrosion-resistant
5.High load-bearing capacity(thermal shock resistance, cycles)
5.Customization the igniters according to customers' specific requirement.
Application
One special application area for our high temperature ceramic igniters is in heating systems that
use solid fuels such as wood pellets as energy source. The challenge here is to ignite the biomass in a very short time while retaining very low emission values. This can be perfectly achieved by our hot surface ceramic igniters.
Ceramic hot surface igniters for pellet boilers need only approx. 1/10 of the energy of that needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 200 Watt. Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is extremely short. This also means minimal emissions!
Igniting wood chips, firewood, coal bricks or other biomass (such as corn, etc.) is possible.
|
1 |
Part No. |
G78105-21 |
|
2 |
Usage |
ceramic igniter for Pellet burner |
|
3 |
Working Voltage |
230VAC |
|
4 |
Power |
150--230(W) |
|
5 |
Dimension |
L=94mm; D=17.5mm (standard igniter) |
|
6 |
Silicon Cable |
0.5m long |
|
7 |
Advantages |
(1)Ready assembled, easy-to-install systems.
(2)Ready to fit solution: High temperature heating element in temperature-resistant ceramic socket
(3)Space-saving, noiseless and impervious to overheating.
(4)Element temperature: over 1000 °C in permanent and alternating operation, for a short time up to 1200 °C
(5)Lifetime up to 100,000 heating cycles, depending on operating conditions
(6)Minimal energy consumption
(7)Ignition through air heating: Due to extremely high heater temperature and ideal geometric conditions, air is heated in a very short time to very high temperatures - the ideal ignition blower!
(8)Igniting wood chips, firewood, coal bricks or other biomass (corn, etc.) is possible. |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}